Distribution power cable for static outdoor application (with protection against direct UV-irradiation), in ground, in water, within facilities, in cable canals, in concrete, in conditions where heavier mechanical loads and specially tensile strains, are not expected. Used in industrial plants, metropolitan networks and in other electric plants.

Construction

Conductor:		Al, class 1 or 2
class 1:		Solid, round(RE) or sector (SE)
class 2:		Multi wire stranded, round (RM) or sector (SM)
Insulation:		PVC compound
Filler:		Extruded elastomer or plastomer compound or wrapped thermoplastic tapes
Sheath:		PVC compound
sheath colour:		Black

Temperature range:
During installation:	-5 °C up to +50 °C
Fixed installed:	-30 °C up to +70 °C
At short circuit of max. 5 s:	up to 160 °C
Nominal voltage:	Uο/U = 0,6/1 kV
Test voltage:	4 kV
Max. operating voltage in three-phase systems:	1,2 kV
Maximal tensile strength:	30 N/mm²
Behaviour in fire:	IEC 60332-1
Minimal inner bending radius:
single core:	15D
multi core:	12D

Dimensions – number of cores x conductor cross-section	Construction	External diameter	Insulation thickness	Sheath thickness	Conductor resistance at 20 °C	Short circuit current 1s	Cu weight	Cable weight	Packing*
		min - max.	nom.	nom.	max.	nom.		prib.
N x mm²		mm	mm	mm	Ω/km	kA	kg/km	kg/km
1 x 50	RM	14 - 17	1,4	1,8	0,641	3,80	-	298	CUT
1 x 70	RM	16 - 19	1,4	1,8	0,443	5,32	-	383	CUT
1 x 95	RM	18 - 21	1,6	1,8	0,320	7,22	-	490	CUT
1 x 120	RM	19 - 22	1,6	1,8	0,253	9,12	-	575	CUT
1 x 150	RM	21 - 25	1,8	1,8	0,206	11,40	-	695	CUT
1 x 185	RM	23 - 27	2,0	1,8	0,164	14,10	-	845	CUT
1 x 240	RM	26 - 30	2,2	1,8	0,125	18,20	-	1100	CUT
1 x 300	RM	28 - 32	2,4	1,9	0,100	22,80	-	1379	CUT
1 x 400	RM	32 - 37	2,6	2,0	0,0778	27,20	-	1615	CUT
1 x 500	RM	35 - 40	2,8	2,1	0,0605	34,00	-	2015	CUT
1 x 630	RM	41 - 45	2,8	2,2	0,0469	42,84	-	2472	CUT

4 x 16	RE	21 - 25	1,0	1,8	1,91	1,21	-	750	CUT
4 x 25	RE, RM	25 - 32	1,2	1,8	1,200	1,90	-	950	CUT
4 x 35	RE, SM	27 - 34	1,2	1,8	0,868	2,66	-	1141	CUT
4 x 50	SE, SM	29 - 36	1,4	1,9	0,641	3,80	-	1242	CUT
4 x 70	SE, SM	33 - 40	1,4	2,1	0,443	5,32	-	1631	CUT
4 x 95	SE, RM	38 - 45	1,6	2,2	0,320	7,22	-	2063	CUT
4 x 120	SE, SM	41 - 49	1,6	2,4	0,253	9,12	-	2538	CUT
4 x 150	SE, SM	46 - 54	1,8	2,5	0,206	11,40	-	3090	CUT
4 x 185	SE, SM	51 - 59	2,0	2,7	0,164	14,10	-	3838	CUT
4 x 240	SE, SM	57 - 65	2,2	2,9	0,125	18,20	-	4863	CUT

4 x 16+2,5	RM+RE	21,6	1,0	1,8	1,91	1,21	24	781	CUT
4 x 25+2,5	RM+RE	28	1,2	1,8	1,200	1,90	24	981	CUT
4 x 35+2,5	SM+RE	31	1,2	1,8	0,868	2,66	24	1172	CUT
4 x 50+2,5	SM+RE	35	1,4	1,9	0,641	3,80	24	1273	CUT
4 x 70+2,5	SM+RE	38	1,4	2,1	0,443	5,32	24	1662	CUT
4 x 95+2,5	SM+RE	42	1,6	2,2	0,320	7,22	24	2094	CUT
4 x 120+2,5	SM+RE	46	1,6	2,4	0,253	9,12	24	2569	CUT
4 x 150+2,5	SM+RE	49	1,8	2,5	0,206	11,40	24	3121	CUT
4 x 185+2,5	SM+RE	54	2,0	2,7	0,164	14,10	24	3869	CUT
4 x 240+2,5	SM+RE	59	2,2	2,9	0,125	18,20	24	4894	CUT