Medium voltage power cable for static application in ground, within and outside facilities, outdoor, in cable canals, in water, in conditions where cables are not exposed to heavier mechanical stress and tensile strain. Due to its very low factor of dielectric loss, which remains constant over its entire operating lifetime, and owing to excellent insulation property of XLPE-material, firmly longitudinally spliced with inner and external screen of semi-conductive material (extruded in one process), the cable has a high operating reliability. Used in transformer stations, switching blocks, in electric power plants and industrial plants. To avoid the effects of external impact, the adhering semi-conductive layer extruded between conductor and insulation, along with concentric copper conductor, secures restriction of electric field and resistance to partial discharges.

Construction

Temperature range:
During installation:	-5 °C up to +70 °C
Max. operating temp.:	+90 °C
At short circuit of max. 5 s:	up to 250 °C

Minimal inner bending radius:	15D

Conductor:		Cu round conductor, multi wire stranded compacted (RM), class 2 acc. IEC 60228
Inner screen:		Extruded semi-conductive skin on conductor
Insulation:		XLPE (cross-linked polyethylene, recent mark: PE-X) compound DIX 8 acc. to HRN HD 620 S1
External screen:		Extruded semi-conductive skin on insulation, longitudinally spliced with insulation (+ tape of conductive material)
Concentric conductor:		In inner layer corrugated spirally wrapped copper wires, in external layer copper tape wrapped in counter-helix
Separating		Tape
Sheath:		PVC compound
sheath colour:		Red

Dimensions – number of cores x conductor cross-section	Construction	Conductor diameter	Insulation thickness	External diameter	External diameter	Conductor resistance at 20 °C	Short circuit current 1s	Cu weight	Cable weight	Packing*
		max.	nominal	min.	max.	max.	nominal		prib.
N x mm²		mm	mm	mm	mm	Ω/km	A	kg/km	kg/km
6/10 kV
1 x 35/16	RM	07,5	3,4	23	28	0,524	5,00	518	892	CUT
1 x 50/16	RM	08,6	3,4	24	29	0,387	7,15	662	1027	CUT
1 x 70/16	RM	10,2	3,4	26	31	0,268	10,0	854	1254	CUT
1 x 95/16	RM	12,0	3,4	27	32	0,193	13,6	1094	1525	CUT
1 x 120/16	RM	13,5	3,4	29	34	0,153	17,2	1334	1773	CUT
1 x 150/16	RM	15,0	3,4	30	35	0,124	21,4	1622	2050	CUT
1 x 150/25	RM	15,0	3,4	30	35	0,124	21,4	1723	2135	CUT
1 x 185/16	RM	16,8	3,4	32	37	0,0991	26,5	1958	2450	CUT
1 x 185/25	RM	16,8	3,4	32	37	0,0991	26,5	2059	2482	CUT
1 x 240/16	RM	19,2	3,4	34	39	0,0754	34,3	2486	3000	CUT
1 x 240/25	RM	19,2	3,4	34	39	0,0754	34,3	2587	3045	CUT
1 x 300/25	RM	21,6	3,4	36	41	0,0601	42,9	3163	3646	CUT
1 x 400/35	RM	24,6	3,4	40	45	0,0470	57,2	4234	4557	CUT
1 x 500/35	RM	27,6	3,4	43	48	0,0366	71,5	5194	5585	CUT
1 x 630/35	RM	31,5	3,4	48	52	0,0283	90,1	6395	7090	CUT
12/20 kV
1 x 35/16	RM	7,5	5,5	27	32	0,524	5,00	518	1067	CUT
1 x 50/16	RM	8,6	5,5	28	33	0,387	7,15	662	1208	CUT
1 x 70/16	RM	10,2	5,5	30	35	0,268	10,0	854	1446	CUT
1 x 95/16	RM	12,0	5,5	31	36	0,193	13,6	1094	1726	CUT
1 x 120/16	RM	13,5	5,5	33	38	0,153	17,2	1334	1983	CUT
1 x 150/16	RM	15,0	5,5	34	39	0,124	21,4	1622	2300	CUT
1 x 150/25	RM	15,0	5,5	34	39	0,124	21,4	1723	2353	CUT
1 x 185/16	RM	16,8	5,5	36	41	0,0991	26,5	1958	2650	CUT
1 x 185/25	RM	16,8	5,5	36	41	0,0991	26,5	2059	2712	CUT
1 x 240/16	RM	19,2	5,5	39	44	0,0754	34,3	2486	3250	CUT
1 x 240/25	RM	19,2	5,5	39	44	0,0754	34,3	2587	3290	CUT
1 x 300/25	RM	21,6	5,5	41	46	0,0601	42,9	3163	3889	CUT
1 x 400/35	RM	24,6	5,5	44	49	0,0470	57,2	4234	4831	CUT
1 x 500/35	RM	27,6	5,5	47	52	0,0366	71,5	5194	6050	CUT
1 x 630/35	RM	31,5	5,5	51	55	0,0283	90,1	6395	7340	CUT
18/30 kV
1 x 50/16	RM	8,6	8,0	33	38	0,387	7,15	662	1455	CUT
1 x 70/16	RM	10,2	8,0	35	40	0,268	10,0	854	1706	CUT
1 x 95/16	RM	12,0	8,0	36	41	0,193	13,6	1094	2001	CUT
1 x 120/16	RM	13,5	8,0	38	43	0,153	17,2	1334	2270	CUT
1 x 150/25	RM	15,0	8,0	39	44	0,124	21,4	1723	2650	CUT
1 x 185/25	RM	16,8	8,0	41	46	0,0991	26,5	2059	3022	CUT
1 x 240/25	RM	19,2	8,0	43	48	0,0754	34,3	2587	3618	CUT
1 x 300/25	RM	21,6	8,0	46	51	0,0601	42,9	3163	4350	CUT
1 x 400/35	RM	24,6	8,0	49	54	0,0470	57,2	4234	5350	CUT
1 x 500/35	RM	27,6	8,0	52	57	0,0366	71,5	5194	6450	CUT
1 x 630/35	RM	31,5	8,0	57	62	0,0283	90,1	6395	7800	CUT